Product Description

Zinc Alloy Pillow Block bearing Kfl001 Kfl002 Kfl003 Kfl004 Kfl005Kfl006

Quick Details

Type:	Pillow Block	Bore Size:	12 – 60 mm	Brand Name:	YD
Model Number:	KFL001,KFL002,KFL003,KFL004,KFL005,KFL006	Place of Origin:	China	cage:	zinc alloy

Specifications
1. Original brands
2. Best quality
3. High limiting speed and low noise
4. ISO9001: 2000

Services:
Pillow block bearing
Adjustable pillow block
Plummer blocks
Self-aligning housing pillow block bearing
Manufacturer
 

Bearing Unit NO.	Shaft Dia d	Dimensions(mm)										Bearing No.	Housing No.	Housing Wt (kg)
	(mm)	a	e	i	g	l	s	b	z	Bi	n
KFL000	10	60	45	5.5	5.5	11.5	7	36	15.5	14	4	K000	FL000	0.032
KFL001	12	63	48	5.5	5.5	11.5	7	38	16	14.5	4	K001	FL001	0.041
KFL002	15	67	53	6.5	6.5	13	7	42	18.6	16.5	4.5	K002	FL002	0.05
KFL003	17	71	56	7	7	14	7	46	19.5	17.5	5	K003	FL003	0.068
KFL004	20	90	71	8	8	16	10	55	23	21	6	K004	FL004	0.104
KFL005	25	95	75	8	8	16	10	60	24.5	22.5	6	K005	FL005	0.11
KFL006	30	112	85	9	9	18	13	70	27	24.5	6.5	K006	FL006	0.168

UCP200 series pillow block bearing series :

Bearing Unit	Shaft Dia.	Dimensions(mm)									Bearing No.	Housing No.	Weight(kg)
	d(mm)	h	a	e	b	s	g	w	Bi	n
UCP201	12	30.2	127	96	38	19	15	62	31.0	12.7	UC201	P201	0.63
UCP202	15	30.2	127	96	38	19	15	62	31.0	12.7	UC202	P202	0.61
UCP203	17	30.2	127	96	38	19	15	62	31.0	12.7	UC203	P203	0.59
UCP204	20	33.3	127	96	38	19	15	65	31.0	12.7	UC204	P204	0.61
UCP205	25	36.5	140	105	38	19	16	70	34	14.3	UC205	P205	0.74
UCP206	30	42.9	165	121	48	21	18	83	38.1	15.9	UC206	P206	1.15
UCP207	35	47.6	167	126	48	21	19	92	42.9	17.5	UC207	P207	1.40
UCP208	40	49.2	184	136	54	21	19	98	49.2	19.0	UC208	P208	1.78
UCP209	45	54.0	190	146	54	21	20	106	49.2	19.0	UC209	P209	2.00
UCP210	50	57.2	206	159	60	25	22	112	51.6	19.0	UC210	P210	2.55
UCP211	55	63.5	219	171	60	25	22	126	55.6	22.2	UC211	P211	3.2
UCP212	60	69.8	241	184	70	25	25	137	65.1	25.4	UC212	P212	4.4
UCP213	65	76.2	265	203	70	29	27	150	65.1	25.4	UC213	P213	5.1
UCP214	70	79.4	266	210	72	31	27	156	74.6	30.2	UC214	P214	5.7
UCP215	75	82.6	275	217	74	31	28	163	77.8	33.3	UC215	P215	6.3
UCP216	80	88.9	292	232	78	31	30	175	82.6	33.3	UC216	P216	7.6
UCP217	85	95.2	310	247	83	31	32	187	85.7	34.1	UC217	P217	9.2
UCP218	90	101.6	327	262	88	33	34	200	96.0	39.7	UC218	P218	11.4

We are specialized in bearing export, production, selling and after-service. Our principle is service and quality First!
Pillow block:
1). Casting vertical pillow block: P
2). Casting high center vertical pillow block: pH
3). Casting narrow vertical pillow block: PA
4). Casting quadrate pillow block: FU
5). Casting convex plate quadrate pillow block: FS
6). Casting rhombic pillow block: FLU
7). Casting adjustable rhombic pillow block: FA
8). Casting convex plate circular pillow block: FC
9). Casting slide plate pillow block: K
10). Casting circlip pillow block: C
11). Casting triangle pillow block: FT
12). Casting suspension pillow block: FB
13). Casting suspended pillow block: HA
14). Pressing vertical pillow block: PP
15). Pressing circular pillow block: PF
16). Pressing triangle pillow block: PFT
17). Pressing rhombic pillow block: PFL

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are 2 main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on 1 side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between 2 and 16 inches. A screw with a pointy tip has a smaller major diameter than 1 without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is 1 element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of 1 thread to the corresponding point on the next thread. Measurement is made from 1 thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in 1 revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.

The lead of a screw shaft

Pitch and lead are 2 measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are 2 ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with 2 or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are 2 types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.