Tag Archives: shaft wholesaler

China wholesaler High Efficiency Twin Screw Press and Screw Press Shaft for Industrial Sewage threaded shaft for garage door opener

Product Description

Screw concentrating press is designed and developed by our company by working with internationally leading press enterprises, and is mainly used for pressing and dehydrating various material containing ﬁber. It ﬁnds extensive applications in many industries such as ﬁsh meal, bone meal, meat meal, starch, fermentation broth, forage, papermaking, bagasse, pectin, pharmacy, sewage treatment, etc.

Twin screw design ensures excellent squeezing performance.
Integrated structure, easy for installation and shifting .
1. twin screw design ensures excellent squeezing performance.
2. Integrated structure , easy for installation and shifting .
3. electromagnetic speed variable motor, with wide range of speed, applied to various
raw fish species.
4. stainless steel crust and mesh plates for the better corrosion resistance.
5. equipped with gear surface hardened reducer, low noise and long life.

Work Principle

A pair of variable diameter shatis and variable pitch screws run in opposite direction and squeeze out the liquid through ﬁltration. It is featured by high extraction eﬃciency, small damage to materials, less loss of materials and convenient operation.
Slurry enters the machine through the feeding inlet and pushed by rotation of the variable diameter screw shati in the opposite direction. Screw blades and spindles are designed to have a varying pitch and a varying diameter, the gap from the feeding inlet to outlet of spiral blade gets smaller but spindle diameter gets bigger so that the volume of the slurry in the screen is gradually compressed and mixed slurry is discharged through the screen under the squeezing action, and the liquid is continuously separated from the slurry.
The solid-ﬂuid separation system comprises of a bridge, a sieve plate, a screen and a screw shati, which are ﬁxed by screws on the base for support of ﬁltration and dehydration of materials during extrusion. The aperture of sieve plate is 0.1-5 mm to avoid loss of big particles.
Compression ratio is big with good dehydration eﬃciency, water content of output is low, operation is stable and free of vibration, and consecutive production can be achieved.

Product Parameters

Model	TP-24	TP-35	TP-41	TP-49	TP-56	TP-64	TP-1000	TP-1500	TP-2000	TP-3000
Production capacity (t/h)	2.5	5	13	18	25	50	50	75	100	150
Screw speed (r.p.m)	1-11
Motor power(M)	11	18.5	30	45	55	90	90	200	250	355
Equipment weight(t)	4	8	10	14	21	28	28	48	75	118

Company Profile

Located in Fangqiao National Machinery Industrial Park, at the Xihu (West Lake) Dis. Lake, HangZhou City, ZheJiang , China, ZheJiang STORD WORKS LTD.is home to more than 180 employees , covers an area of 25000 M2 and has more than 70 various manufacturing and testing devices,with the maximum lifting capacity of 100T and the maximum plate rolling capacity of 120mm.

StordWorks has the specialized drying machine production workshop and advanced machining centers. We also have various international pressure vessels certification and abundant experiences in equipment manufacturing, such as National standard pressure vessel certification, American ASME certification, Norske Veritas DNV certification and EU PED certification.

ZheJiang StordWorks adheres to the business philosophy of “Focusing on Professionalism & Quality First”, and the service concept
of “Customer-orientation and Exceeding Customer Satisfaction”. By means of our excellent quality and perfect service, JiagnsuStord Works Ltd. sincerely looks forward to cooperating with you!

Packaging & Shipping

1) Carefully check the quantity and quality of equipment before packing.
2) Good packed by plastic wrap.
3) Fittings and spare parts are packed in wooden pallet .
4) Suitable for export transport and sea freight.
5) Add labels and shipping mark.

Why Choose us

• 1. We are manufacture workshop, we can provide the high quality products with factory price and communicate with you at any time in production.
• 2. We have wide range of processing equipments and advanced testing machine, which can guarantee us to manufacture the better quality products.
• 3. We serve every customer who comes to consult with our utmost sincerity
• 4. We have obtained the pressure vessel production license, pressure vessel design certificate, ISO9001, ISO14000, ASME, DNV, SGS, PED certificates.
• 5. After years’ of hard working, Our cooperative partners are all around the world. We warmly invite customers to take part in our New Year celebration party.

After-sales Service:	Commissioning on Site
Warranty:	12 Months
Type:	Rotary Drying Equipment

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

screwshaft

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are two types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The two types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are two types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in two stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to six times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.
screwshaft

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are two different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each one is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.
screwshaft

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the two materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

China wholesaler High Efficiency Twin Screw Press and Screw Press Shaft for Industrial Sewage threaded shaft for garage door opener
editor by CX 2023-11-23

China China Factory OEM Service Screw CNC Machining Stainless Steel Transmission Shaft wholesaler

Product Description

China Factory OEM Service Screw CNC Machining Stainless Steel Transmission Shaft

Our factory specializing in making precision CNC machining part and assembly services for OEM and ODM part Our company has 1 set CNC gantry machine,15 sets CNC machine center,2 sets CNC lathe,8 sets CNC milling etc. Our material usually processed are Aluminum,Stainless steel,Brass,Carton Steel,Free cutting steel,Tooling Steel,Enginnering Plastic.
Product Description

precision cnc parts for camera in aluminum,brass, stainless steel material
processed by casting and CNC lathe
with machining finish, anodize oxidation finishing

Our Experience

We are with rich experience in processing of various materials,
such as AL6061/7075, SUS303, 304, ESD225/420, DERLIN, SI36H, SS440C,17-4 ph, Ceramic, Carbide,Engineering Plastics such as PEEK and so on. In addition, we can also provide some special processing, special heat treatment and special electroplating, surface treatment for customer, such as optical grinding, honing, precision EDM specialshaped processing, carburizing, nitriding, vacuum heat treatment and cryogenic treatment, the hard anodized aluminum, steel blue, electrolytic polishing, nickel sank without electricity,silver-plated, gold-plated and so on.

Material: Copper,iron,aluminum,stainless steel,alloy steel,plastic.etc.Which we usually processing are as following show.

Aluminum	6061-T6,6063-T5,7075-T6,2011,2017,2571,5052,5083,6082,etc
Stainless steel	SUS303, SUS304, SUS316,SUS316L, SUS430, SUS440, SUS420, SUS201,etc.
Steel	Q235,20#,45#,Cr12,SKD11,A2,40Cr,16Mn,Cr12Mov,etc.
Carbon Steel	1571,1015,1571,1030,1035,1040,1045,etc.
Free Cutting Steel	1211,12L13,12L14,1215,etc.
Brass	C11000,C15710,C12000,C26000(HPb59),C36000(C26800), C38500(HPb58, C27200(CuZn37), C28000(CuZn4),etc.
Plastic	PVC,PE, PMMA,POM,Telfon,Delrin,PEEK,Nylon, ABS,PC,PP,PA6,PA66,etc.

Processing method:

1	CNCTurning
2	Auto lathe
3	3/4 axis CNC milling
4	CNC turning and milling compound processing
5	Grinding
6	Fast/midium/slow wire EDM
7	Wire-Cutting
8	Welding
9	Cast
10	Taping
11	Drilling

Surface treatment:

1	Zinc/nickel/chrome plating
2	hot galvanized
3	painting
4	powder coating
5	Anodize Oxidation, or with colors:like silver, blue, red, etc.
6	plating,silver-plated,Gold-plated,etc
7	polishing
8	electrolytic polishing
9	sank without electricity nickel
etc	etc.

Our Services

Our Services: Providing whole set complete accessories processing, and also can assembled as customers’ requirement. Help you to save time,save labor,and save worry.

Quality

100% inspection before shipping for sample, sampling inspectio as the customer’s requirements for mass production.

Packaging & Shipping

Packing:As per our standard,if you have requirement, please tell me.

Our satandard packing: products wrapped with bubble, or in 1 piece/PP bag, wooden box or parper carton,

Company Information

HangZhou CZPT Precision Machining Co.,Ltd specialized in processing all kinds of precision parts, products widely used in Machining,Electronic,Automatic line, Automobile,Plane,Computer, Communication,Medical equipment, Design, Manufacturing, fixture,mold and some other industries.

Our Equipments

Prcessing Equipements
No.	Eqipment name	Quantity(sets)	Precision	Max processing size
1	CNC Planer type milling machine	1	0.005mm	2000*1300mm
2	4 Axis CNC milling machine	1	0.005mm	D30mm to 40mm
3	CNC milling machine	14	0.005mm	800450mm,600350mm
4	Milling machine	14	0.02mm	780*350mm
5	CNC lathe machine	3	0.002mm	D450*500mm
6	Lathe machine	2	0.01mm	D360*750
7	Plane grinding maching	4	0.005mm	350200150mm
8	High speed WEDM	4	0.02mm	700400500
9	Low speed WEDM	2	0.01mm
10	Hydraulic sheet metal bending machine	1		VC67Y-30T*1600mm, Liter pressure:300kN

The main test equipment
Number	Equiment name	Specification	Quantity(set)	Brand	Origin
1	Electronic Altimeter	0-600mm	1	TESR	Switzerland
2	Image Measurement Instrument	250*150mm	1	JATEH	China
3	Rockwell Apparatus	HR-150A	1	Shidai	China
4	Surface roghness comparison Specimens		1	HangZhou	China

Why Choose us?

1:Factory directly, with good quality and reasonable price.
2:For processing: We have rich experience in processing many kinds of machining parts with many kinds of materials.
Highly welcome Non-standar, standard, OEM, customized machining parts.
Parts can with high precision, tolerance can reach to +0.005mm, surface Roughness can reach to Ra0.8-3.2
3:For assembling: We have professional assembling department, because our factory also make equipments, could provide assembling and degugging service for you.
4:For quality: We are with ISO standard, and with PND production and managment system, every part will be test and check before shipping.
5:For MOQ: our MOQ is 1 piece.
6:For production time: Fast lead time. Samples:5-7days, mass production:12-15days.
7:For Logo: customized Logo is available by laser marking.
8:For service: We processing parts according artwork strictly, and provide afterservice is parts different with artwork.

FAQ

1: Do you have stock goods?

We only make products according customers order, don’t have stock products, all processing according to customers’ requirements.

2: What artwork form we need to provide?

Answer:2D Processing artwork in PDF,JPG,cdr or others, or DWG, STP also can use, but if need 2D processing artwork to calculate price.

As different product has different usage, we need according your processing artwork or sample to process.And for different products need different material,processing skill, please provide us your processing artwork or samples to help us to calculate detail price for you.

Detail view

Other machining products

Our factory

Condition:	New
Certification:	CE, RoHS, GS, ISO9001
Standard:	DIN, ASTM, GOST, GB, JIS, ANSI
Customized:	Customized
Material:	Aluminum
Application:	Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Aluminum	6061-T6,6063-T5,7075-T6,2011,2017,2024,5052,5083,6082,etc
Stainless steel	SUS303, SUS304, SUS316,SUS316L, SUS430, SUS440, SUS420, SUS201,etc.
Steel	Q235,20#,45#,Cr12,SKD11,A2,40Cr,16Mn,Cr12Mov,etc.
Carbon Steel	1010,1015,1020,1030,1035,1040,1045,etc.
Free Cutting Steel	1211,12L13,12L14,1215,etc.
Brass	C11000,C10200,C12000,C26000(HPb59),C36000(C26800), C38500(HPb58, C27200(CuZn37), C28000(CuZn4),etc.
Plastic	PVC,PE, PMMA,POM,Telfon,Delrin,PEEK,Nylon, ABS,PC,PP,PA6,PA66,etc.

###

1	CNCTurning
2	Auto lathe
3	3/4 axis CNC milling
4	CNC turning and milling compound processing
5	Grinding
6	Fast/midium/slow wire EDM
7	Wire-Cutting
8	Welding
9	Cast
10	Taping
11	Drilling

###

1	Zinc/nickel/chrome plating
2	hot galvanized
3	painting
4	powder coating
5	Anodize Oxidation, or with colors:like silver, blue, red, etc.
6	plating,silver-plated,Gold-plated,etc
7	polishing
8	electrolytic polishing
9	sank without electricity nickel
etc	etc.

###

Prcessing Equipements
No.	Eqipment name	Quantity(sets)	Precision	Max processing size
1	CNC Planer type milling machine	1	0.005mm	2000*1300mm
2	4 Axis CNC milling machine	1	0.005mm	D30mm to 40mm
3	CNC milling machine	14	0.005mm	800450mm,600350mm
4	Milling machine	14	0.02mm	780*350mm
5	CNC lathe machine	3	0.002mm	D450*500mm
6	Lathe machine	2	0.01mm	D360*750
7	Plane grinding maching	4	0.005mm	350200150mm
8	High speed WEDM	4	0.02mm	700400500
9	Low speed WEDM	2	0.01mm
10	Hydraulic sheet metal bending machine	1		VC67Y-30T*1600mm, Liter pressure:300kN

###

The main test equipment
Number	Equiment name	Specification	Quantity(set)	Brand	Origin
1	Electronic Altimeter	0-600mm	1	TESR	Switzerland
2	Image Measurement Instrument	250*150mm	1	JATEH	China
3	Rockwell Apparatus	HR-150A	1	Shidai	China
4	Surface roghness comparison Specimens		1	Weifang	China

Condition:	New
Certification:	CE, RoHS, GS, ISO9001
Standard:	DIN, ASTM, GOST, GB, JIS, ANSI
Customized:	Customized
Material:	Aluminum
Application:	Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Aluminum	6061-T6,6063-T5,7075-T6,2011,2017,2024,5052,5083,6082,etc
Stainless steel	SUS303, SUS304, SUS316,SUS316L, SUS430, SUS440, SUS420, SUS201,etc.
Steel	Q235,20#,45#,Cr12,SKD11,A2,40Cr,16Mn,Cr12Mov,etc.
Carbon Steel	1010,1015,1020,1030,1035,1040,1045,etc.
Free Cutting Steel	1211,12L13,12L14,1215,etc.
Brass	C11000,C10200,C12000,C26000(HPb59),C36000(C26800), C38500(HPb58, C27200(CuZn37), C28000(CuZn4),etc.
Plastic	PVC,PE, PMMA,POM,Telfon,Delrin,PEEK,Nylon, ABS,PC,PP,PA6,PA66,etc.

###

1	CNCTurning
2	Auto lathe
3	3/4 axis CNC milling
4	CNC turning and milling compound processing
5	Grinding
6	Fast/midium/slow wire EDM
7	Wire-Cutting
8	Welding
9	Cast
10	Taping
11	Drilling

###

1	Zinc/nickel/chrome plating
2	hot galvanized
3	painting
4	powder coating
5	Anodize Oxidation, or with colors:like silver, blue, red, etc.
6	plating,silver-plated,Gold-plated,etc
7	polishing
8	electrolytic polishing
9	sank without electricity nickel
etc	etc.

###

Prcessing Equipements
No.	Eqipment name	Quantity(sets)	Precision	Max processing size
1	CNC Planer type milling machine	1	0.005mm	2000*1300mm
2	4 Axis CNC milling machine	1	0.005mm	D30mm to 40mm
3	CNC milling machine	14	0.005mm	800450mm,600350mm
4	Milling machine	14	0.02mm	780*350mm
5	CNC lathe machine	3	0.002mm	D450*500mm
6	Lathe machine	2	0.01mm	D360*750
7	Plane grinding maching	4	0.005mm	350200150mm
8	High speed WEDM	4	0.02mm	700400500
9	Low speed WEDM	2	0.01mm
10	Hydraulic sheet metal bending machine	1		VC67Y-30T*1600mm, Liter pressure:300kN

###

The main test equipment
Number	Equiment name	Specification	Quantity(set)	Brand	Origin
1	Electronic Altimeter	0-600mm	1	TESR	Switzerland
2	Image Measurement Instrument	250*150mm	1	JATEH	China
3	Rockwell Apparatus	HR-150A	1	Shidai	China
4	Surface roghness comparison Specimens		1	Weifang	China

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which one is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.
screwshaft

Acme screw

An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
screwshaft

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, one should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are two major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically one millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect two elements.
screwshaft

Ball screw

The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.

China China Factory OEM Service Screw CNC Machining Stainless Steel Transmission Shaft wholesaler
editor by czh 2022-11-27

China Hot selling 3screws Aluminum Electrical Garage Door Cable Spools Drum 12mm Dia Shaft Cable Reel Drum for Cable Sectional Garage Doors wholesaler

Product Description

Description	4*13 Cable drum
Art. NO.	CH-CD01,CH-CD02
Material:	Aluminum

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which 1 is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

Acme screw

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, 1 should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are 2 major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically 1 millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect 2 elements.
screwshaft

Ball screw

China Hot selling 3screws Aluminum Electrical Garage Door Cable Spools Drum 12mm Dia Shaft Cable Reel Drum for Cable Sectional Garage Doors wholesaler

China wholesaler High Precision CZPT Standard Thread Rod Shaft Lead Screw with Great quality

Product Description

Material: Stainless Steel C45.

Special specifications products can be customized according to the customer request.

Hope you build up a long cooperation relationship with us; we will give you a discount and provide the free sample for your reference.
Looking forward to your early inquiry.

Products	Precision CNC machining parts
Materials	Iron, aluminum, steel, copper, carbon steel, bronze, solder alloy, or as per the customers’ requirements.
Dimensions	According to customer’ s drawing
Surface treatment	Blacking, polishing, anodize, chrome plating, zinc plating, nickel plating, tinting or other as requirement.
Packing	Bubble Bag, plastic bag, carton, plywood box, or as per the customer’ s requirements
Standard	Such as ISO, DIN, GB, CZPT and special standard
Certificate	ISO9001: 2008
Processing equipment	CNC machine, CNC machining center, CNC cutting machine, radial drill, universal milling machine, high precision surface grinding machine, chamfering machine, etc.
Processing equipment
QC System	100% during production check and random samples before shipment.
QC System
Available	OEM, ODM
MOQ	negotiable
Ports	HangZhou or ZheJiang
Delivery	Samples 7-15 days, batch production 30 days.

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are 2 main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on 1 side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between 2 and 16 inches. A screw with a pointy tip has a smaller major diameter than 1 without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is 1 element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
screwshaft

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of 1 thread to the corresponding point on the next thread. Measurement is made from 1 thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in 1 revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are 2 measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are 2 ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with 2 or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are 2 types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China wholesaler High Precision CZPT Standard Thread Rod Shaft Lead Screw with Great quality

China Professional International Standard Single Shaft Protection Tape Roll Slitter Machine wholesaler

Product Description

International standard Single shaft protection tape Roll slitter machine

1. Main driving part ZheJiang AC motor with inverter is employed.
2. Central control unit Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting
3. Operating panel All functions are operated on the 10″ LCD touch panel.
4. Motor control system The central control system is PLC programmable controller.
5. Cutting positioning system: Cutting positioning is controlled by CZPT servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
6. Blade feeding positioning system Blade feeding is controlled by CZPT servo motor, and the cutting speed is adjustable in 3 stages.
7. Auto angle adjustment of circular blade CZPT servo motoris used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is ± 8° ).
8. Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.

Optional Parts
1. Other size cutting shaft It can be made as per the required core I. D.
2. Cutting supporter For supporting log roll when cutting core below 38mm.
3. Safety cover To protect operator during the production which is compliant to the CE regulation.

Main Technical Parameters

Machine width	1.3M 1.6M
Cutting precision	+/-0.1mm
Max. Cutting O. D.	150mm
Min. Cutting width	1mm
Inner core I. D.	1″-3″

Screw Shaft Types

A screw shaft is a cylindrical part that turns. Depending on its size, it is able to drive many different types of devices. The following information outlines the different types of screws, including their sizes, material, function, and applications. To help you select the right screw shaft, consider the following factors:
screwshaft

Size

A screw can come in a variety of shapes and sizes, ranging from a quarter to a quarter-inch in diameter. A screw is a cylindrical shaft with an inclined plane wrapped around it, and its main function is to fasten objects together by translating torque into a linear force. This article will discuss the dimensions of screws and how to determine the size of a screw. It is important to note that screw sizes can be large and small depending on the purpose.
The diameter of a screw is the diameter of its shaft, and it must match the inner diameter of its nuts and washers. Screws of a certain diameter are also called machine screws, and they can be larger or smaller. Screw diameters are measured on the shaft underneath the screw head. The American Society of Mechanical Engineers (ASME) standardized screw diameters in 3/50-inch to 16 (3/8-inch) inches, and more recently, sizes were added in U.S. fractions of an inch. While shaft and head diameters are standardized, screw length may vary from job to job.
In the case of the 2.3-mm screw group, the construct strength was not improved by the 1.2-mm group. The smaller screw size did not increase the strength of the construct. Further, ABS material did not improve the construct strength. Thus, the size of screw shaft is an important consideration in model design. And remember that the more complex your model is, the larger it will be. A screw of a given size will have a similar failure rate as a screw of a different diameter.
Although different screw sizes are widely used, the differences in screw size were not statistically significant. Although there are some limitations, screws of different sizes are generally sufficient for fixation of a metacarpal shaft fracture. However, further clinical studies are needed to compare screw sizes for fracture union rates. So, if you are unsure of what size of screw shaft you need for your case, make sure to check the metric chart and ensure you use the right one.
screwshaft

Material

The material of a screw shaft plays an important role in the overall performance of a screw. Axial and central forces act to apply torque to the screw, while external forces, such as friction, exert a bending moment. The torsional moments are reflected in the torque, and this causes the screw to rotate at a higher rate than necessary. To ensure the longevity of the screw, the material of the screw shaft should be able to handle the bending moment, while the diameter of the shaft should be small enough to avoid causing damage.
Screws are made from different metals, such as steel, brass, titanium, and bronze. Manufacturers often apply a top coating of chromium, brass, or zinc to improve corrosion resistance. Screws made of aluminum are not durable and are prone to rusting due to exposure to weather conditions. The majority of screw shafts are self-locking. They are suited for many applications, including threaded fasteners, C-clamps, and vises.
Screws that are fabricated with conical sections typically feature reduced open cross-sectional areas at the discharge point. This is a key design parameter of conical screw shafts. In fact, reductions of up to 72% are common across a variety of applications. If the screw is designed to have a hard-iron hanger bearing, it must be hardened. If the screw shaft is not hardened, it will require an additional lubricant.
Another consideration is the threads. Screw shafts are typically made of high-precision threads and ridges. These are manufactured on lathes and CNC machines. Different shapes require different materials. Materials for the screw shaft vary. There are many different sizes and shapes available, and each 1 has its own application. In addition to helical and conical screw shafts, different materials are also available. When choosing material, the best 1 depends on the application.
The life of the screw depends on its size, load, and design. In general, the material of the screw shaft, nut body, and balls and rollers determine its fatigue life. This affects the overall life of the screw. To determine whether a specific screw has a longer or shorter life, the manufacturer must consider these factors, as well as the application requirements. The material should be clean and free of imperfections. It should be smooth and free of cracks or flaking, which may result in premature failure.

Function

The function of a screw shaft is to facilitate the rotation of a screw. Screws have several thread forms, including single-start, double-start and multi-start. Each form has its own advantages and disadvantages. In this article we’ll explore each of them in detail. The function of a screw shaft can vary based on its design, but the following are common types. Here are some examples of screw shaft types and their purposes.
The screw’s torque enables it to lift objects. It can be used in conjunction with a bolt and nut to lift a load. Screws are also used to secure objects together. You can use them in screw presses, vises, and screw jacks. But their primary function is to hold objects together. Listed below are some of their main functions. When used to lift heavy loads, they can provide the required force to secure an object.
Screws can be classified into 2 types: square and round. Square threads are more efficient than round ones because they apply 0deg of angle to the nut. Square threads are also stronger than round threads and are often used in high-load applications. They’re generally cheaper to manufacture and are more difficult to break. And unlike square threads, which have a 0deg thread angle, these threads can’t be broken easily with a screwdriver.
A screw’s head is made of a series of spiral-like structures that extend from a cylindrical part to a tip. This portion of the screw is called the shank and is made of the smallest area. The shank is the portion that applies more force to the object. As the shaft extends from the head, it becomes thinner and narrow, forming a pointed tip. The head is the most important part of the screw, so it needs to be strong to perform its function.
The diameter of the screw shaft is measured in millimeters. The M8 screw has a thread pitch of 1.25 mm. Generally, the size of the screw shaft is indicated by the major and minor diameter. These dimensions are appended with a multiplication sign (M8x1).
screwshaft

Applications

The design of screws, including their size and shape, determines their critical rotating speeds. These speeds depend on the threaded part of the screw, the helix angle, and the geometry of the contact surfaces. When applied to a screw, these limits are referred to as “permissible speed limits.” These maximum speeds are meant for short periods of time and optimized running conditions. Continuous operation at these speeds can reduce the calculated life of a nut mechanism.
The main materials used to manufacture screws and screw shafts include steel, stainless steel, titanium, bronze, and brass. Screws may be coated for corrosion resistance, or they may be made of aluminium. Some materials can be threaded, including Teflon and nylon. Screw threads can even be molded into glass or porcelain. For the most part, steel and stainless steel are the most common materials for screw shafts. Depending on the purpose, a screw will be made of a material that is suitable for the application.
In addition to being used in fasteners, screw shafts are used in micrometers, drillers, conveyor belts, and helicopter blades. There are numerous applications of screw shafts, from weighing scales to measuring lengths. If you’re in the market for a screw, make sure to check out these applications. You’ll be happy you did! They can help you get the job done faster. So, don’t delay your next project.
If you’re interested in learning about screw sizing, then it’s important to know the axial and moment loads that your screws will experience. By following the laws of mechanics and knowing the load you can calculate the nominal life of your screw. You can also consider the effect of misalignment, uneven loading, and shocks on your screw. These will all affect the life of your screw. Then, you can select the right screw.

China Professional International Standard Single Shaft Protection Tape Roll Slitter Machine wholesaler

China wholesaler Precision Od 10mm Cylinder Liner Rail Linear Shaft Optical Axis wholesaler

Product Description

PRODUCT PARAMETERS

ITEM: hard chrome plated rod (induction or without)

MATERIAL: CK45/1045/S45C/SS304/other

SURFACEHARDNESS: HRC18-20/HRC58-60

CHROME LAYER THICKNESS: 15μm ~ 25μm

CHROME LAYER HARDNESS: above HV800

AXIS STRAIGHTNESS: 0.15mm /1000mm

ROUGHNESS: Ra 0.2μm~0.4μm

PRECISION: H7

PRODUCTION PROCESS

CAPABILITY

OTHER PRODUCTS

HONE TUBE & DRAWINGS CUSTOM-MADE

PACKING

COMPANY OVERVIEW

HangZhou CZPT PRECISION MACHINERY CO., LTD. ESTABLISHED IN 2009, IT IS A PROFESSIONAL SUPPLIER OF HYDRAULIC CHROME PLATED PISTON RODS ,INDUCTON LINEAR SHAFT, LINEAR MOTION BEARING ,LINEAR XIHU (WEST LAKE) DIS., LINEAR MODULE AND BALL SCREW ETC. OUR COMPANY LOCATED IN HangZhou, WHICH IS A FOREIGN TRADE ORIENTED ECONOMIC DEVELOPED CITY, ADJACENT TO INTERNATIONAL PORT CITY ZheJiang .

APPLICATIONS

HYDRAULIC CYLINDERS
TRUCK AND AUTOMOTIVE PARTS
HEAVY EQUIPMENT
AGRICULTURAL COMPONENTS
AUTO AND TRUCK AXLES, SUSPENSION PARTS AND SHOCK ABSORBERS
HIGH SPEED SHAFTS AND ROLLERS
BEARINGS AND SPACERS, ROLL CAGES, AND MANY OTHER MACHINED TUBULAR PARTS.

IF YOU ARE INTERESTED IN OUR COMPANY, PLEASE FEEL FREE TO CONTACT US:

HangZhou CZPT PRECISION MACHINERY CO., LTD
ADD: NO.217 CZPT BUILDING, NO.668 FENGTING STREET, HangZhou INDUSTRIAL PARK P.R.C

http://chromedbars
http://chromedbars

Screw Sizes and Their Uses

The major diameter of a screw shaft

The pitch diameter of a screw shaft

The thread depth of a screw shaft

The lead of a screw shaft

The thread angle of a screw shaft

The tapped hole (or nut) into which the screw fits

China wholesaler Precision Od 10mm Cylinder Liner Rail Linear Shaft Optical Axis wholesaler

China high quality Customized Steel Shaft Worm Shaft Precision Machining Metal Parts wholesaler

Product Description

Our Advantages

Our advantange, Low MOQ as less as 1 piece, 100% inspection, Short Lead time.

Our service

We manufacture various shafts made according to drawing, including roud shaft, square shaft, hollow shaft, screw shaft, spline shaft, gear shaft, etc.

Material	Alloy, stainless steel, Carbon steel, etc.
Mahines	NC lathe, Milling macine, Ginder, CNC, Gear milling machine.
Third party inspection	Available, SGS, CNAS, BV, etc.
UT standard	ASTM A388, AS1065, GB/T6402, etc.
Packaging	Seaworthy packing
Drawing format	PDF, DWG, DXF, STP, IGS, etc.
Application	Industry usage, Machine usage.
MOQ	1 piece
Drawing format	PDF, DWG, DXF, STP, IGS, etc.
Quotation time	1 days.
Lead time	Generaly 30-40 days for mass production.

Our Product

During the pass 10 years, we have supplied hundreds of customers with perfect precision machining jobs:

Workshop & machining process

We manufacture various shafts made according to drawing, including roud shaft, square shaft, hollow shaft, screw shaft, spline shaft, gear shaft, etc.

FAQ

Q: Are you treading company or manufacturer?
A: We are manufacturer.

Q: How about your MOQ?
A: We provide both prototype and mass production, Our MOQ is 1 piece.

Q:How long can I get a quote after RFQ?
A:we generally quote you within 24 hours. More detail information provided will be helpful to save your time.
1) detailed engineering drawing with tolerance and other requirement.
2) the quantity you demand.

Q:How is your quality guarantee?
A:we do 100% inspection before delivery, we are looking for long term business relationship.

Q:Can I sign NDA with you?
A:Sure, we will keep your drawing and information confidential.

Lead Screws and Clamp Style Collars

If you have a lead screw, you’re probably interested in learning about the Acme thread on this type of shaft. You might also be interested in finding out about the Clamp style collars and Ball screw nut. But before you buy a new screw, make sure you understand what the terminology means. Here are some examples of screw shafts:

Acme thread

The standard ACME thread on a screw shaft is made of a metal that is resistant to corrosion and wear. It is used in a variety of applications. An Acme thread is available in a variety of sizes and styles. General purpose Acme threads are not designed to handle external radial loads and are supported by a shaft bearing and linear guide. Their design is intended to minimize the risk of flank wedging, which can cause friction forces and wear. The Centralizing Acme thread standard caters to applications without radial support and allows the thread to come into contact before its flanks are exposed to radial loads.
The ACME thread was first developed in 1894 for machine tools. While the acme lead screw is still the most popular screw in the US, European machines use the Trapezoidal Thread (Metric Acme). The acme thread is a stronger and more resilient alternative to square threads. It is also easier to cut than square threads and can be cut by using a single-point threading die.
Similarly to the internal threads, the metric versions of Acme are similar to their American counterparts. The only difference is that the metric threads are generally wider and are used more frequently in industrial settings. However, the metric-based screw threads are more common than their American counterparts worldwide. In addition, the Acme thread on screw shafts is used most often on external gears. But there is still a small minority of screw shafts that are made with a metric thread.
ACME screws provide a variety of advantages to users, including self-lubrication and reduced wear and tear. They are also ideal for vertical applications, where a reduced frictional force is required. In addition, ACME screws are highly resistant to back-drive and minimize the risk of backlash. Furthermore, they can be easily checked with readily available thread gauges. So, if you’re looking for a quality ACME screw for your next industrial project, look no further than ACME.
screwshaft

Lead screw coatings

The properties of lead screw materials affect their efficiency. These materials have high anti-corrosion, thermal resistance, and self-lubrication properties, which eliminates the need for lubrication. These coating materials include polytetrafluoroethylene (PFE), polyether ether ketone (PEK), and Vespel. Other desirable properties include high tensile strength, corrosion resistance, and rigidity.
The most common materials for lead screws are carbon steel, stainless steel, and aluminum. Lead screw coatings can be PTFE-based to withstand harsh environments and remove oil and grease. In addition to preventing corrosion, lead screw coatings improve the life of polymer parts. Lead screw assembly manufacturers offer a variety of customization options for their lead screw, including custom-molded nuts, thread forms, and nut bodies.
Lead screws are typically measured in rpm, or revolutions per minute. The PV curve represents the inverse relationship between contact surface pressure and sliding velocity. This value is affected by the material used in the construction of the screw, lubrication conditions, and end fixity. The critical speed of lead screws is determined by their length and minor diameter. End fixity refers to the support for the screw and affects its rigidity and critical speed.
The primary purpose of lead screws is to enable smooth movement. To achieve this, lead screws are usually preloaded with axial load, enabling consistent contact between a screw’s filets and nuts. Lead screws are often used in linear motion control systems and feature a large area of sliding contact between male and female threads. Lead screws can be manually operated or mortised and are available in a variety of sizes and materials. The materials used for lead screws include stainless steel and bronze, which are often protected by a PTFE type coating.
These screws are made of various materials, including stainless steel, bronze, and various plastics. They are also made to meet specific requirements for environmental conditions. In addition to lead screws, they can be made of stainless steel, aluminum, and carbon steel. Surface coatings can improve the screw’s corrosion resistance, while making it more wear resistant in tough environments. A screw that is coated with PTFE will maintain its anti-corrosion properties even in tough environments.
screwshaft

Clamp style collars

The screw shaft clamp style collar is a basic machine component, which is attached to the shaft via multiple screws. These collars act as mechanical stops, load bearing faces, or load transfer points. Their simple design makes them easy to install. This article will discuss the pros and cons of this style of collar. Let’s look at what you need to know before choosing a screw shaft clamp style collar. Here are some things to keep in mind.
Clamp-style shaft collars are a versatile mounting option for shafts. They have a recessed screw that fully engages the thread for secure locking. Screw shaft clamp collars come in different styles and can be used in both drive and power transmission applications. Listed below are the main differences between these 2 styles of collars. They are compatible with all types of shafts and are able to handle axial loads of up to 5500 pounds.
Clamp-style shaft collars are designed to prevent the screw from accidentally damaging the shaft when tightened. They can be tightened with a set screw to counteract the initial clamping force and prevent the shaft from coming loose. However, when tightening the screw, you should use a torque wrench. Using a set screw to tighten a screw shaft collar can cause it to warp and reduce the surface area that contacts the shaft.
Another key advantage to Clamp-style shaft collars is that they are easy to install. Clamp-style collars are available in one-piece and two-piece designs. These collars lock around the shaft and are easy to remove and install. They are ideal for virtually any shaft and can be installed without removing any components. This type of collar is also recommended for those who work on machines with sensitive components. However, be aware that the higher the OD, the more difficult it is to install and remove the collar.
Screw shaft clamp style collars are usually one-piece. A two-piece collar is easier to install than a one-piece one. The two-piece collars provide a more effective clamping force, as they use the full seating torque. Two-piece collars have the added benefit of being easy to install because they require no tools to install. You can disassemble one-piece collars before installing a two-piece collar.
screwshaft

Ball screw nut

The proper installation of a ball screw nut requires that the nut be installed on the center of the screw shaft. The return tubes of the ball nut must be oriented upward so that the ball nut will not overtravel. The adjusting nut must be tightened against a spacer or spring washer, then the nut is placed on the screw shaft. The nut should be rotated several times in both directions to ensure that it is centered.
Ball screw nuts are typically manufactured with a wide range of preloads. Large preloads are used to increase the rigidity of a ball screw assembly and prevent backlash, the lost motion caused by a clearance between the ball and nut. Using a large amount of preload can lead to excessive heat generation. The most common preload for ball screw nuts is 1 to 3%. This is usually more than enough to prevent backlash, but a higher preload will increase torque requirements.
The diameter of a ball screw is measured from its center, called the ball circle diameter. This diameter represents the distance a ball will travel during 1 rotation of the screw shaft. A smaller diameter means that there are fewer balls to carry the load. Larger leads mean longer travels per revolution and higher speeds. However, this type of screw cannot carry a greater load capacity. Increasing the length of the ball nut is not practical, due to manufacturing constraints.
The most important component of a ball screw is a ball bearing. This prevents excessive friction between the ball and the nut, which is common in lead-screw and nut combinations. Some ball screws feature preloaded balls, which avoid “wiggle” between the nut and the ball. This is particularly desirable in applications with rapidly changing loads. When this is not possible, the ball screw will experience significant backlash.
A ball screw nut can be either single or multiple circuits. Single or multiple-circuit ball nuts can be configured with 1 or 2 independent closed paths. Multi-circuit ball nuts have 2 or more circuits, making them more suitable for heavier loads. Depending on the application, a ball screw nut can be used for small clearance assemblies and compact sizes. In some cases, end caps and deflectors may be used to feed the balls back to their original position.

China high quality Customized Steel Shaft Worm Shaft Precision Machining Metal Parts wholesaler

China wholesaler Competitive Price Heavy Duty Power Transmission Shaft with Free Design Custom

Product Description

We supply kinds of axles for transmission system(rotary components) , wheel , electric motor… , usually made of alloy steel , high quality product manufactured by qualified capable machines and controlled under IATF16949 or ISO9001 procedures

Part NO.	Customized according to buyer’s specification
Material	Alloy steel 40Cr,42CrMo,20CrMnTi,20CrNiMo….
Heat treatment	Quenching , carburization , nitriding , induction hardening

“AND”, HangZhou AND Machinery, is professional with mechanical power transmission parts , engineering&supply bearings, shafts, gears and machining parts .

Our well-educated engineers cooperative work with the experts-who with many years of experience in the mechanical processing industry-in workshops,comprehensively consider the balance between product performance and processing capacity/processing costs, that is, to ensure product performance while controlling lower costs; we have the ability to participate in the discussion of optimal design of transmission parts when clients develop new products, to help speed up the development process;

Each of our manufacturers has specialized products and processes he is good at , which is the most cost-effective – based on this concept, we integrate and manage our supply chain, form a production-sales community. We , AND, play an important role in the community to make the communication more smooth and the supply chain runs more efficient and stable. We organize and manage orders according to ISO9000 or IATF16949 quality system-most manufacturers have the certificates , strictly control the quality / improve the quality. We turn the customer’s requirements, ideas and concepts into reality, make the customer’s products more competitive and help my customer succeed.

Three parties of the chain , manufacturers- AND-our foreign clients , cooperates to each other in engineering / quality control&improve / reduce costs/communicate&service , we are complementary and win-win.

We have established firm and long cooperative relationship with clients all over the world in the past 20 years , built good reputation depends on our professional technical ability and perfect service.

We are unsung heroes, supporting machines running in every corner of the world.

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.
screwshaft

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.
screwshaft

Self-locking property of screw shaft

A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.
screwshaft

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

China wholesaler Competitive Price Heavy Duty Power Transmission Shaft with Free Design Custom

China Professional Stainless Keyless Hub Shaft Locking Devices C45 Steel wholesaler

Product Description

Locking Device/Power Lock/Locking Assembly
Locking Devices provide a keyless, extreme high strength connection between components and round shafts. They feature a smooth, nonmarring bore which contracts securely onto a shaft while expanding the OD tightly into the I.D. of a hub. Fully adjustable, they are balanced to minimize vibration at high speeds, and prevent backlash damage caused by heavy loads.

1.Easy installed and removed: no heating,cooling or knocking while installation;
2.Releasing and pushing out screws without striking
3.Random axial position and radial direction for installation
4.Easy operation in narrow space
5.Easy operation with giant machine parts
6.Free from angular and axial backlash
7.Overload protection in some occasions (prevent overload slipping)
8.Key slot can be added to prevent overload slipping
9.Shaft and hub can be designed smaller,lighter, cost and space saving
10.Saving cost by reducing machining accuracy of shaft and hole

PACKING

_Packaging

Packing

We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.

OUR COMPANY

ZheJiang Mighty Machinery Co., Ltd. specializes in offering best service and the most competitive price for our customer.

After over 10 years’ hard work, MIGHTY’s business has grown rapidly and become an important partner for oversea clients in the industrial field and become a holding company for 3 manufacturing factories.

MIGHTY’s products have obtained reputation of domestic and oversea customers with taking advantage of technology, management, quality and very competitive price.

Your satisfaction is the biggest motivation for our work, choose us to get high quality products and best service.

OUR FACTORY

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.

We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.

Screws and Screw Shafts

Machined screw shaft

Ball screw nut

Self-locking property of screw shaft

Materials used to manufacture screw shaft

China Professional Stainless Keyless Hub Shaft Locking Devices C45 Steel wholesaler

China supplier Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40) wholesaler

Product Description

Product Description
Linear Shaft is the guiding effect of sliding bearing, which can make the products of linear motion.
The necessary conditions required by the linear motion system is: simple design, the best performance, low maintenance cost, using the selected durable material, high-frequency heat treatment, the accurate outside
diameter size, roundness, really straight and surface treatment, etc.

Linear Shaft (Linear rod; Steel bar; Optical axis)
Product Name	Factory directly supply steel axis 40mm shaft for cnc kits (WCS40 SFC40)
Model No.	WCS40 SFC40
Material	Carbon Steel
Hardness	HRC60 ± 2
Hardened layer thickness	0.8mm-3mm
Length	0-6000mm (If you need above 6000mm,we can anti-connect for you)
Precision	g6
Roughness	Within 1.5μm
Straightness	Not excess 1.5μm of 100mm (Rmax)
Other linear shaft type	Solid shaft, hollow shaft, threaded shaft, stainless steel shaft
Other Material	Bearing Steel GCr15, Carbon Steel 45#, SUS440C
OEM & Customized	We are Professional bearing manufactory in China, the bearing of High Quality can be OEM & Customized according to your requirement, such as for thread shaft or not, Reduced shaft diameter, Coaxial Holes Drilled and Tapped, Flats-Single or Multiple, Key Way, Snap ring Grooves, Radial Holes Drilled and Tapped, Chamfering, etc.

JLD Linear Shaft Application:

1. Solid shaft
Generally applicable to industrial robots, as a professional measuring instruments, medical equipment, precision machine tools, aircraft shaft, pneumatic mandrel movement part.
2. Hollow shaft
With its weight to reduce equipment, simplify the structure of the advantages, you can then wear the internal measurement of wire, compressed air, can also add lubricants and hydraulic oil.
3. Stainless steel shaft
It’s generally suitable for use as a part of the measurement in the presence of chemicals such as chemicals, seawater and other
Substances.
Special machining shafts are finely finished after heat treatment with hard chrome plating for all types of automation equipment.

JLD Special Machining for Linear Shaft:
1. For the Length

We can offer linear shaft with diameterφ5mm-φ150mm. Maxium length up to 6000mm.

When you are special requirements on length, we can meet your machining requirements with different length.

When you request above 6000mm, we can anti-connect for you.

2. For Special Processing

When you have special requirements on machining. Such as threading, coaxial holes drilled and tapped, radial holes drilled and tapped, reduced shaft diameter etc, we can machine for you, and these special machines are finished after heat treatment and hard chromic so that ensure the precision of product.

Send us your detailed sketch or blue print for propmt quotation and action, you should be satisfied with our service.

About Us

HangZhou City CZPT Bearing Co., Ltd. is a professional manufacturer of linear motion products since 2007. We specialized in producing linear guides, ball screws, linear shafts, linear motion slide units, linear bearings, rod ends bearings, cam follower bearings/Needle roller bearing, precision linear module with good quality and competitive price. For OEM service, the products can be Customized according to customers’ needs for standard or non-standard bearings.

Our Services

Our Quality:
Quality is the life. We use only the best quality material to ensure the standard of our product range is of the highest caliber.
All products we sold out are strictly selected and tested by our QC department.
Warranty:
We provide 1 year warranty for all products.
Payment:
We accept payment via TT (Bank transfer), Paypal, Western Union, and Money Gram.
We accept bank transfer for large orders. For small order, you’d better pay via Paypal, Western union or Money Gram
Shipping:
We offer as many shipping options as possible, including DHL, UPS, TNT, FedEx and EMS, Airfreight and by Sea.

FAQ
1. Are you factory or trading company?
We are factory with most competitive price and high quality. We are Alibaba Gold Supplier seller since 2011.

2. Customized accepted?
Yes, of course, such as the bearing brand of Japanese, USA, Sweden and so on are available. If that, please send us the drawing of the type with the picture will be most appreciated.

3. Can I get some samples or more discounts?
Yes, just to contact us and we are honored to offer samples to you for checking.

4. How about the time of delivery?
For the products in stock, it will be sent out in 1-3 days; Or it will be sent out 3-30 days according to the quantity.

5. What’s your products main line?
Since 2007, we specialized in producing all kinds of linear shaft, linear bearing, flange bearing, ball screw, linear CZPT way, linear motion ball bearing, needle roller bearing, etc.

6. How can I get a quotation?
Normally, we will quote within 24 hours. If you are in urgent, please give a call or let us know in your email with the details.
We need information bellow:
1. The Model Number/ the detail drawing of non-standard bearing;
2. Quantity;
3. Material;
4. Surface treatment;
5. Any special packing or other requirements.

Screws and Screw Shafts

Machined screw shaft

Ball screw nut

Self-locking property of screw shaft

Materials used to manufacture screw shaft

China supplier Bearing Factory Directly Supply Shaft 40mm Steel Rod for CNC Kit (WCS40 SFC40) wholesaler